ABB 1SAM250000R1003 MS116-0.4 Manual Motor Starter

Perlengkapan Listrik Lainnya

Rated Service Short-Circuit Breaking Capacity (Ics):
(230 V AC) 50 kA
(400 V AC) 50 kA
(440 V AC) 50 kA
(500 V AC) 30 kA
(690 V AC) 30 kA

Rated Ultimate Short-Circuit Breaking Capacity (Icu):
(230 V AC) 100 kA
(400 V AC) 100 kA
(440 V AC) 100 kA
(500 V AC) 100 kA
(690 V AC) 100 kA

Rated Instantaneous Short-Circuit Current Setting (Ii):
5 A

Setting Range:
0.25 ... 0.40 A

Rated Operational Power AC-3 (Pe):
(400 V) Three Phase 0.09 kW

Rated Operational Power AC-3e (Pe):
(400 V) Three Phase 0.09 kW

Rated Operational Voltage:
Main Circuit 690 V AC

Rated Operational Current (Ie):
0.4 A

Rated Operational Current AC-3 (Ie):
0.4 A

Rated Operational Current AC-3e (Ie):
0.4 A
Rated Frequency (f):

Main Circuit 50 Hz
Main Circuit 60 Hz

Rated Impulse Withstand Voltage (Uimp):
Main Circuit 6 kV

Rated Insulation Voltage (Ui):
690 V
Power Loss:at Rated Operating Conditions per Pole 0.6 ... 1.7 W
Number of Poles:3
Conventional Free-air Thermal Current (Ith):
Main Circuit 0.4 A
Degree of Protection:Housing IP20
Main Circuit Terminals IP10
Pollution Degree:3

Electrical Durability:
100000 cycle

Mechanical Durability:
100000 cycle

Terminal Type:
Screw Terminals

Connecting Capacity Main Circuit:
Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²

Flexible 1/2x 0.75 ... 2.5 mm²
Rigid 1/2x 1 ... 4 mm²

Tightening Torque:
Main Circuit 0.8 ... 1.2 N·m

Wire Stripping Length:
Main Circuit 9 mm

Recommended Screw Driver:
Pozidriv 2

Mounting on DIN Rail:
TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715

Minimum Mounting Distance:
Electrical Conductive Board, Horizontal - Up to 400 V 0 mm
Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm
Electrical Conductive Board, Vertical 75 mm
Other Device Same Type, Horizontal 0 mm
Other Device Same Type, Vertical 150 mm

Actuator Type:
Rotary Handle

Contact Position Indication:
ON / OFF