ABB SOFT STARTER PSE142-600-70 1SFA897110R7000

Perlengkapan Listrik Lainnya
Rated Operational Voltage:
208 ... 600 V AC

Rated Control Supply Voltage (Us):
100 ... 250 V AC

Rated Control Circuit Voltage (Uc):
24 V DC

Rated Frequency (f):
50/60 Hz
Main Circuit 50 / 60 Hz

Rated Operational Power - In-Line Connection (Pe):
(230 V) 40 kW
(400 V) 75 kW
(500 V) 90 kW

Rated Operational Current - In-Line Connection (Ie):
143 A

Service Factor Percentage:
100 %

Overload Protection:
Build-in electronic overload protection

Integrated Electronic Overload:
Yes

Adjustable Rated Motor Current Ie:
30 ... 100 %

Starting Capacity at Maximum Rated Current Ie:
4xIe for 10s

Ramp Time:
0 ... 30 second [unit of time]
1 ... 30 second [unit of time]

Initial Voltage During Start:
30 ... 70 %

Step Down Voltage Special Ramp:
No %

Current Limit Function:
1.5 ... 7xIe

Switch for Inside Delta Connection:
No

Run Signal Relay:
Yes

By-pass Signal Relay:
Yes

Fault Signal Relay:
Yes

Overload Signal Relay:
Yes

Analog Outputs:
4…20 mA

Signal Indication Completed Start Ramp (LED):
Green

Signal Indication Ready to Start/Standby ON (LED):
Green

Signal Indication Running R (LED):
Green

Signal Indication Ramping Up/Down (LED):
Green

Signal Indication Protection (LED):
Yellow

Signal Indication Fault (LED):
Red

Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time:
10

Communication:
Modbus-RTU

Degree of Protection:
IP00

Terminal Type:
Main Circuit: Bars

Connecting Capacity Main Circuit:
Hole Diameter 8.5 mm
Rigid 1/2 x 2.5 ... 70 mm²
Width and Thickness 17.5x5 mm

Connecting Capacity Control Circuit:
Rigid 1 x 2.5 mm²
Rigid 2 x 1.5 mm²

Connecting Capacity Supply Circuit:
Rigid 1 x 2.5 mm²

Tightening Torque:
Control Circuit 0.5 N·m
Main Circuit 18 N·m
Supply Circuit 0.5 N·m

Product Main Type:
PSE142

Function:
Soft start with torque control
Soft start with voltage ramp
Soft stop with torque control
Soft stop with voltage ramp
Kick start
Sequence start
Current limit
Start reverse (external contactors)
Automatic restart
Event log